🔥Universal EPB Emergency Release Tool

🚘 EPB Emergency Release Tool

Releases a locked electronic parking brake when your battery dies or the EPB fails. Two channels – left and right calipers. Key difference: 1-second auto-stop. Press the button, power runs for 1 second then shuts off. No motor burnout. Also has 5A fuse, reverse polarity protection, self-test.

🛑 1-Second Auto-Stop – No Motor Damage
When you press the button, voltage outputs for exactly 1 second then cuts off automatically. Even if you hold the button down. This prevents the EPB motor from overheating and the caliper from over-traveling. Most cheap tools lack this.

🔄 Dual-Channel – Braking & Release Modes
Two independent channels control left and right rear calipers. Switch between Braking Mode (apply parking brake) and Release Mode (disengage). You need both for pad replacement or towing. One tool does both jobs.

⚡ Overload Protection – 5A Fuse
The tool includes a 5A fast-blow fuse. If the EPB motor draws excessive current (seized caliper or short circuit), the fuse blows before any damage occurs. Replaceable. Works with the 1-second auto-stop as a second layer of safety.

🔋 Reverse Polarity Protection & Self-Test
Connect the clips backwards? No damage – the circuit simply won‘t activate. Press Self-Test before connecting to the vehicle to verify the tool is working. DC 10V-14V input works with any standard car battery or jump starter.

📍 When You Need This Tool
Scenario 1: Battery below 9V – EPB won‘t release. Scenario 2: Replacing rear brake pads – piston must be retracted electrically. Scenario 3: EPB control module failure – no communication from OBD tools. Scenario 4: Moving a disabled vehicle without dragging tires.

📐 Specifications
Input: DC 10V-14V. Fuse: 5A fast-blow (replaceable). Channels: 2 (left and rear right calipers independently controlled). Auto-stop: 1 second. Protection: Reverse polarity, over-current, over-travel. Housing: Impact-resistant ABS. Cable: 16AWG.